Designed to work with the following winches:
- KFI on VIKING: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / SE25 / SE35 / SE45-R2 / AS-50 / AS-50w (Will NOT work with U45w-R2 or SE45w-R2 WIDE winches)
- KFI on WOLVERINE: ST17 / A2000 / A2500-R2 / A3000 / SE25 / SE35 / AS-50 / AS-50w (Will NOT work with U45-R2, U45w-R2, SE45-R2 or SE45w-R2 winches)
- WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
- WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30
- WARN: RT40 / XT40 (Requires the drilling of two holes)
- WARN: Vantage 2000-3000lb
- WARN: Vantage 4000lb (Requires the drilling of two holes)
- WARN: ProVantage 2500-3500 lb
- WARN: ProVantage 4500 lb (Requires the drilling of two holes)
- RAMSEY: ATV2500 / ATV3000
- SUPERWINCH: Terra25 / Terra35 / LT2000 / LT2500 / LT3000 / LT4000ATV / LT4000UTV
- SUPERWINCH: Terra 45 (Requires drilling of two holes)
- MILE MARKER: PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500 (2-hole mounted winches will require the drilling of one hole)
- CYCLE COUNTRY: Work Power 1500 and 2500 / Powermax 2500 and 3500
- BADLAND: 2-Hole Winches (Requires drilling of hole(s))
- BADLAND: Standard Winches
- BADLAND: WIDE Winches (Requires drilling of two holes)
- CHAMPION: 2-Hole Winches
- CHAMPION: Standard Winches
- CHAMPION: WIDE Winches (Requires drilling of two holes)
- Possibly many others with the below standard mounting patterns, call to confirm:
- 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
- 4-Hole WIDE that will require the drilling of two holes (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)
- 2-Hole that will require the drilling of one hole (3.10" with rollers that are 4.875" bolt pattern)
This product fits the following vehicle models:
- Yamaha Viking 700 - 2014^
- Yamaha Viking 700 EPS - 2015-2024^
- Yamaha Viking 700 EPS Camo - 2015-2018^
- Yamaha Viking 700 EPS SE - 2014-2024^
- Yamaha Viking FI 4x4 EPS - 2014^
- Yamaha Viking VI - 2014-2022^
- Yamaha Wolverine 700 EPS - 2015-2018
- Yamaha Wolverine 700 EPS Camo - 2015-2016
- Yamaha Wolverine 700 R-Spec - 2015-2016
- Yamaha Wolverine X2 - 2019
- Yamaha Wolverine X2 R-Spec - 2018-2019
- Yamaha Wolverine X4 - 2018-2019
^ Fitting requires two holes to be drilled in mount.
No Reviews Available
Installation
Most of our products come shipped with installation instructions. But we know sometimes things can be a little trickier than they seem. If you need some assistance installing this product, drop us a line and one of our friendly staff can give you some advice.
Contact Us
