High Clearance 1.5" Offset Front A-Arms For RZR XP 1000 (14-23) - Inc HD 4340 Chromoly Ball Joints

A Better Kind of A-Arm

You know what's cool? Rock crawling in your RZR. You know what's not cool? Realizing your A-Arms — not your tyres — are supporting your RZR's weight. You need SuperATV's Polaris RZR XP 1000 High-Clearance 1.5" Forward A-Arms to keep you out of (and above) trouble. The larger-than-stock design makes them much stronger than OEM. You'll be able to run bigger tyres without a lift, and the offset gives you more stability on rough ground.

More Clearance, Better A-Arms

Not content with stock, we gave our Polaris RZR XP 1000 high-clearance A-Arms a bend design. You'll be able to enjoy an additional 38 mm (1.5") of ground clearance without the hassle of adding a lift kit. Off-roading is a lot more fun when you're not hitting every rock on the trail. Something else you'll appreciate is the 38 mm (1.5") forward offset. It'll give you more stability, whether you're climbing hills or crawling over rocks. The offset gives you room for up to 34" tyres, too.

Stronger by Design

SuperATV make these A-Arms out of 31.75 mm (1.25") tubing — that's a full 25% larger than stock. Not only do we build them right, but we also give them a UV-resistant powder coat finish. With their sleek tubed design, our A-Arms look as good as they perform. As an added bonus, we include UHMW bushings. Like our A-Arms, they're incredibly tough. The bushings are also self-lubricating, so they get smoother the more you ride. That saves you time, money, and hassle.

It goes without saying these A-Arms are tough — tough enough we give them a lifetime warranty. You won't get that from the factory, either.

The Convenience of Flexible A-Arms

Pivot! Pivot! These RZR XP 1000 forward A-Arms come with adjustable pivot blocks. We ship them set to stock specs, so you don't have to mess with them if you don't want to. But if you decide you wanna put a lift kit on your ride or fine-tune your handling, the option will be there for you. Plus, the ability to adjust your camber can prevent premature tyre wear.

Adds a 38 mm (1.5") forward offset
Adds 38 mm (1.5") of ground clearance
Comes with pre-installed HD 4340 Chromoly Steel Ball Joints
Fit up to 34" tyres
31.75 mm (1.25") tubing is 25% larger than stock
Adjustable upper pivot block for full camber adjustability
Includes high-quality UHMW bushings at no extra cost
UV-resistant powder coat finish
Easy to install

FITTING NOTES

2017+ models, with stock wheels, will require 25 mm (1") wheel spacers
You may need at least 25 mm (1") wheel spacers

Download Polaris RZR XP 1000 High Clearance Front A-Arm Instructions

This product fits the following vehicle models:

Polaris RZR XP 4 1000 EPS - 2021
Polaris RZR XP 4 Turbo - 2017-2021
Polaris RZR XP 1000 Sport - 2022-2023
Polaris RZR XP4 1000 Sport - 2022-2023
Polaris RZR XP 1000 EPS - 2014-2021
Polaris RZR XP 1000 Trail & Rocks - 2021
Polaris RZR XP Turbo - 2016-2021

Warranty Period: Lifetime

This product is covered by the warranty period listed above.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Refer to the following links for access to Aussie Powersports detailed Warranty Policy and Terms & Conditions of Purchase:

Click here to read Aussie Powersport's Warranty Policy

Click here to read Aussie Powersport's Term & Conditions of Purchase

Warranty Exclusions:
Ball joints and tie rod ends are considered wear and tear items and do not carry a lifetime warranty.

SKU	AA-P-RZRXPT-HC1.5-SBJ-BH
Brand	SUPERATV
Shipping Weight	24.0000kg
Shipping Width	0.520m
Shipping Height	0.240m
Shipping Length	0.690m
Shipping Cubic	0.086112000m3