Dominate the Trail

Your Defender is a high-quality workhorse, but can it keep up on the trail? Nobody will doubt your ability to take on even the biggest obstacles with SuperATV's Can-Am Defender HD7/ HD8 / HD9 High-Clearance 2" Forward Offset A-Arms. Their custom bend design gives you a higher clearance, so you can run up to 32" tyres without a lift! The heavy-duty tubing is 25% larger than stock, so it's visibly bigger and tougher than the average UTV A-Arm. Dominate the trail while turning heads with these badass A-Arms.

More Clearance for More Fun

Our A-Arms add a full 2 inches of forward offset. That means room for bigger tyres without needing a lift (these A-Arms look good on lifted rigs too, by the way). The precision-engineered bend squeezes in an extra 1.5" of ground clearance. Put it all together and these A-Arms will have your Defender sailing over even the roughest terrain. Whether you're on the job or on the trail, our A-Arms make sure your rig is ready for anything.

Bigger = Better

We use heavy-duty 1.25" tubing that's 25% larger than stock. Bigger obviously = better in this situation. Plus, we powder coat every inch that's exposed to the elements for incredible rust and corrosion resistance. Mega size and mega-strength make for heavy-duty, good-looking A-Arms.

Adjustable Camber

This kit uses adjustable pivot blocks so you can set your camber perfectly if you add a lift or extra weight. Don't want to mess with camber? No problem! They're set to stock specs out of the box so you can install and go.

NOTE: You must re-use your stock ball joints. Ball Joints not included.

• Adds a 50.8 mm (2") forward offset
• Adds 38 mm (1.5") of ground clearance
• Run up to 32" tyres
• 31.75 mm (1.25") tubing is 25% larger than stock
• Adjustable lower pivot block for full camber adjustability
• Utilises stock A-Arm bushings
• UV-resistant powder coat finish
• Easy to install
• Kit does not include Ball Joints